Ten protocols, in one program or separately
All the programs only read: they do not change device values or settings and do not send control commands.
Downloads — coming soon Write to us
MasterGateway or Master Protocols
| MasterGateway | Master Protocols | |
|---|---|---|
| Protocols | All ten, also at the same time (OPC DA on Windows only) | One per program |
| Terminal | masterkontact-cli | — |
| License | By protocols and number of variables | Per program |
| Without a license | 10-minute demo mode | 10-minute free trial |
MasterGateway
All ten protocols in a single window, with a coloured dot showing the state of each connection.
- License by protocols and number of variables
- Hardware page: network, serial ports and computer
- License events in the Event Viewer or in syslog
masterkontact-cli: the same reads from the terminal, also on Linux servers without a desktop.
Master Protocols
One program for each protocol, with its own license. The functions are the same as in MasterGateway.
BACnet
Reads objects and properties of building controllers: HVAC, lighting…
- BACnet/IP and MS/TP (RS-485)
- Never uses WriteProperty
- Windows and Linux
SNMP
Reads OIDs, tables and traps from switches, routers, UPSs and servers.
- SNMP v1, v2c and v3, encryption included
- Never sends Set
- Windows and Linux
Modbus
Reads registers and coils of PLCs, meters and drives.
- Modbus TCP, RTU and ASCII, over the network or a serial port
- Read functions only
- Windows and Linux
OPC UA
Reads nodes and values from the OPC UA servers of PLCs, SCADA systems and gateways.
- Anonymous, user or certificate access, also encrypted
- Never uses Write or Call
- Windows and Linux
OPC DA
Reads items with value, quality and timestamp from OPC DA servers.
- OPC DA 2.0 and 3.0, on the same PC or another one (DCOM)
- Never writes to the server
- Windows only, with the 64-bit OPC Core Components
IEC 60870-5-104
Reads measurements, signals and counters from RTUs and substations.
- IEC 60870-5-104 over TCP
- Never sends control commands
- Windows and Linux
DLMS/COSEM
Reads energy, registers and load profiles from meters.
- Over the network, a serial port or an optical probe
- Never uses SET
- Windows and Linux
PROFINET DCP
Finds the PROFINET devices on the network, with their name and IP.
- Never changes names or IP addresses
- On Windows with Npcap, on Linux as root
- Windows and Linux
PROFINET IO
Reads nameplate data, modules, diagnostics and ports of PROFINET IO devices.
- By IP address, no Npcap needed
- Never uses Connect or Write
- Windows and Linux
PROFINET RT
Listens to the cyclic traffic and alarms between the controller and the devices.
- From a mirror port, a TAP or a capture file
- Never transmits
- On Windows with Npcap, on Linux as root
MasterGateway Diagnostica
For when a connection does not work: it shows the state of MasterGateway's connections, tests the connection to a device and shows the network and serial ports. It does not read plant data.
In all the programs
Saved connection profiles, a watch list with value, status and time, automatic reconnection and an interface in five languages. With a license, export to CSV.
System requirements
- Windows 10 or 11, 64-bit: all the programs. No need to install .NET.
- Linux x86-64 with a desktop: all, except OPC DA.
- Linux without a desktop:
masterkontact-cliandmasterkontact-diag. - PROFINET DCP and RT: on Windows they need Npcap, which we do not include; download it from npcap.com. Npcap belongs to Nmap Software LLC and has its own license: the free edition can be installed on at most five computers (virtual machines included); for more, a commercial license is needed. On Linux, start them as root.
Try it for 10 minutes, free
No license and no registration needed. To save, export or copy data you need a license.
Downloads — coming soon Write to us